Skip Navigation
Dr. Bilal Mansoor

Dr. Bilal Mansoor

Associate Professor and Director of the Center for Teaching and Learning

Office Number: 234F
Office Phone: +974.4423.0240


Interest Areas

  • Materials in Extreme Environments
  • Solid State Materials Processing (3D Printing, Friction Stir etc.,)
  • Engineering Education

Dr. Mansoor is currently steering the following events:

  • Annual Symposium on Materials Science and Engineering, https://www.qatar.tamu.edu/mses
  • Workshop on Materials Selection, Reliability and Corrosion Issues
  • Workshop on Manufacturing for the Future

Education

  • Ph.D., Materials Science and Engineering, University of Michigan, Dec. 2010
  • M.S., Mechanical Engineering, University of Michigan, April 2007

Experience

  • Director of Center for Teaching and Learning, Texas A&M University at Qatar, Doha (January 2021 – current)
  • Director of Engineering Enrichment, Center for Teaching and Learning, Texas A&M University at Qatar, Doha (May 2019 – Dec. 2020)
  • Faculty Internship Fellow, Qatar-Shell Research and Technology Center (May 2017 – Dec. 2019)
  • Assistant Professor, Mechanical Engineering Department, Texas A&M University (College Station) (Sept. 2015 – May 2016)
  • Research Engineer, Thixomat Inc., Livonia, USA (Jan. 2006 – Dec. 2006)

Awards

  • ​Winner, Best Rep. Image of Research Outcome (BRIO) Competition, Qatar National Research Fund, 2021
  • Faculty of the Year in Mechanical Engineering, Aggie Achievement Awards by Graduating Seniors, 2020
  • Early Career Faculty, Research Excellence Award, Texas A&M University at Qatar, 2018
  • 2nd place, Best Rep. Image of an Outcome (BRIO) Competition, Qatar National Research Fund, 2018
  • Best Poster Award for the Research Team, Materials Symposium, Qatar, 2017
  • Best Professor of Mechanical Engineering, Student Engineer’s Council, Texas A&M University at Qatar, 2013

Publications

  1. C. Shunmugasamy, E. Khalid, B. Mansoor, “On the metals compatibility assessment for oxygen service. Journal of Loss Prevention in the Process Industries, 74 (2022). https://doi.org/10.1016/j.jlp.2021.104670.
  2. C. Shunmugasamy, E. Khalid, B. Mansoor, Friction stir extrusion of ultra-thin wall biodegradable magnesium alloy tubes — Microstructure and corrosion response, Mater. Today Commun. 26 (2021) 102129. https://doi.org/10.1016/j.mtcomm.2021.102129.
  3. Srivastava, M.W. Vaughan, B. Mansoor, W. Nasim, R.E. Barber, I. Karaman, K.T. Hartwig, Tube equal channel angular extrusion (tECAE) of Mg–3Al–1Zn alloy, Mater. Sci. Eng. A. 814 (2021) 141236. https://doi.org/10.1016/j.msea.2021.141236.
  4. Li, Ming et al., “Binder jetting additive manufacturing of copper/diamond composites: An experimental study”, Journal of Manufacturing Processes, 70 (2021) 205-213.